Transducer Type Pre-polarized Condenser
Frequency Response 50Hz – 18kHz
Polar Pattern Cardioid
Output Impedance 250 Ohms
Sensitivity 5 mV/Pa @1k
Equivalent Noise Level <29 dB (A-weighted)
Signal to Noise Ratio >65 dB
Maximum SPL =120 dB
Power Requirements 9-52 V phantom
Connector Shielded 3’ terminating to a miniature 3 pin Female XLR connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish Machined Brass / Black Finish
Weight 21 g / 0.74 oz
Length 25 mm / .98 in