Flush mount ceiling cardioid microphone. 12? cable terminating into phoenix connector. Requires 18 – 52 V phantom power. White.
Transducer Type Condenser
Frequency Response 60 Hz – 10 kHz
Polar Pattern Cardioid
Output Impedance 150 ohms
Sensitivity 38 mV / Pa @ 1k
Equivalent Noise Level 22 dB
Signal to Noise Ratio 72 dB
Maximum SPL =130 dB
Dynamic Range 108 dB
Power Requirements 18 – 52 V phantom
Connector 3-pin Phoenix fe
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Brass, Aluminum and Steel White or Nickel
Recommended Cable Belden 9451 P or 82761
Length 176 mm / 6.9 in