Full product range with filters module
The Audix ADS48 is a wide range UHF antenna distribution system that combines up to four wireless systems to be able to run off a single pair of antennas and power supply.
Model:
ADS48
The A127 is an onmnidirectional metal film condenser microphone, designed to capture the most accurate and purest form of acoustic instruments and sound sources. The A127 delivers unmatched...
Model:
A127
Includes the RMT42 rackmount and the BNC cables needed for front mounting the antennas.
Model:
RMT42KIT
Metal rackmount that adapts one R42 or R62 two-channel receiver into a single 19-inch rack space.
Model:
RMT42
Metal rackmount that adapts one R41 or R61 receiver into a single 19 inch rack space. Features mounting holes for front mounting antennas (RMT41 KIT required).
Model:
RMT4161
Metal rackmount accessory that adapts two R41 or R61 receivers into a single rack space. When using this rackmount, the antennas must remain on the rear side of the receivers.
Model:
RMT241
The MG Series gooseneck system is equipped with a sophisticated dual preamp circuitry – one circuit located in the capsule housing and the other built into the base of the XLR.
Model:
MG15-ADX
The MicroPodTM Series is a modular system consisting of the M1250B miniature condenser microphone combined with either a 6, 12, or 18-inch gooseneck.
Model:
MICROPOD18
The MG Series gooseneck system is equipped with a sophisticated dual preamp circuitry – one circuit located in the capsule housing and the other built into the base of the XLR.
Model:
MG12-ADX
The MicroPodTM Series is a modular system consisting of the M1250B miniature condenser microphone combined with either a 6, 12, or 18-inch gooseneck.
Model:
MICROPOD6
Pedestal stand with heavy-duty weighted base. For use with the MicroBoom™ for presentation style vocal. Minimum height is 12.8” and maximum height is 21”.
Model:
STANDMB
The MicroBoom™ System is produced in three lengths: 24", 50" and 84" and comes with a carbon fiber rod compatible with any of The Micros™
Model:
MB8450
The MicroBoom™ System is produced in three lengths: 24", 50" and 84" and comes with a carbon fiber rod compatible with any of The Micros™
Model:
MICROBOOM50W
The MicroBoom™ System is produced in three lengths: 24", 50" and 84" and comes with a carbon fiber rod compatible with any of The Micros™
Model:
MICROBOOM50
Great stages and studios deserve Audix. This essential Shock Mount Adapter for ADX-212 & ADX218 Microphones is an ideal, rubber-filled shock mount that snaps to condenser stands.
Model:
SMT1218R
The MicroBoom™ System is produced in three lengths: 24", 50" and 84" and comes with a carbon fiber rod compatible with any of The Micros™
Model:
MICROBOOM24
Audix 6" Gooseneck Mount for Micro Series microphone capsules. The gooseneck is durable and features an XLR male output connector.
Model:
MGN6
