Transducer Type Condenser
Frequency Response 20 Hz – 20 kHz
Polar Pattern Cardioid
Output Impedance 200 ohms
Sensitivity 28 mV / Pa @ 1k
Equivalent Noise Level 14 dB (A-weighted)
Signal to Noise Ratio 80 dB
Maximum SPL =135 dB
Dynamic Range 121 dB
Power Requirements 48-52 V phantom
Connector 3-pin XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Machined Brass / Black Finish
Weight 244 g / 8.6 oz
Length 148 mm / 5.8 in